Used EDM Machine | CNC Milling Machine | Micro EDM Machines

Certified pre-owned equipment, factory demonstration models, and precision manufacturing specials backed by official warranties and technician verification.

Factory-Inspected Machinery & Technical Excellence

At WSM Technology, every pre-owned CNC milling center, Wire EDM, and surface grinder undergoes rigorous multi-point testing by senior field service engineers. With over 40 years of precision tooling and EDM experience, we deliver fully refurbished and low-hour demonstration equipment configured to meet strict aerospace, medical, and mold-making tolerance requirements worldwide.

New Machines & Factory Demo Specials

Limited Demo Availability

Mitsubishi MV1200S Wire EDM with M800 Control

High-precision wire electrical discharge machine featuring non-contact linear shaft drives for smooth motion and high surface finish quality.

  • Travel Capacity: X 15.7” x Y 11.8” x Z 8.7”
  • Work Tank Internal Dimensions: X 31.9” x Y 27.6” x Z 8.5”
  • Motion System: Linear Shaft Motors (X & Y) with Linear Glass Scales
  • Automation: Intelligent Auto-Threader for ultra-fast re-threading
  • Accessories: Advanced Hand Pendant, 3-Sided Table, Chiller Unit
  • Support: Complete Installation, On-site Operator Training & 1-Year Warranty Included
Mitsubishi MV1200S Wire EDM Machine
Special Demo Pricing

ROMI D1000 Vertical Machining Center

$109,500 USD
Original List Price: $127,000 USD

Heavy-duty vertical machining center engineered for rigidity, rapid surface finishing, and continuous industrial production.

  • Travel Capacity: X 40″ x Y 24″ x Z 25″
  • Spindle System: 10,000 RPM Direct Drive, CAT 40 Big Plus Dual Contact
  • Tooling & Coolant: 30-Position Automatic Tool Changer, 100 PSI Through-Spindle Coolant
  • Probing & Control: OMP-60 Blum Part Inspection Probe, Fanuc 0i-MF with 15″ Touchscreen
  • Guideways & Feed: Heavy-Duty Roller Guide Ways, 1,575 in/min Rapid Speeds
  • Warranty: Full 3-Year Factory Warranty
ROMI D1000 Vertical Machining Center
2 Units Available

ZIERSCH Z24 High Precision Surface Grinder

$116,790 USD
Original List Price: $156,545 USD

German-engineered precision surface grinder built with hand-scraped double V-guideways for sub-micron accuracy.

  • Control System: NC Control with 10.4″ Interactive Touch Screen
  • Guideways: Hand-Scraped Double V-Guideway System in X-Axis
  • Positioning Accuracy: Heidenhain Linear Glass Scale on Vertical Axis
  • Magnetic Chuck: SAV Electro-Permanent Magnetic Chuck
  • Coolant & Filtration: Paper Filtration System with Magnetic Separator
  • Features: Automatic Wheel Dressing & Constant Surface Speed Control
ZIERSCH Z24 High Precision Surface Grinder
Ultra-Precision High-Speed Milling

ROKU-ROKU ANDROID II High-Speed Machining Center

World-class Japanese micro-milling machine offering accurate mirror-finish machining and sub-micron positioning tolerances.

  • Machining Accuracy: True Accuracy of ± 1 Micron
  • Travel Capacity: X 17.7″ x Y 13.8″ x Z 7.8″
  • High-Speed Spindle: 60,000 RPM (HSK-E25 Taper) with Thermal Growth Compensation
  • Motion System: Linear Motor Drives across X, Y, and Z Axes
  • Thermal Management: Active Heat Isolation System (H.I.S) with 16 Thermal Sensors
  • Grinding & Probing: Integrated Jig Grinding Option & Renishaw OMP400 Probe
  • Warranty: 2-Year Full Factory Warranty with Installation & Training
ROKU-ROKU ANDROID II High-Speed Machining Center
5-Axis Simultaneous Machining

ROMI DCM 620-5F 5-Axis Vertical Machining Center

$178,125 USD

Advanced 5-axis vertical machining center engineered for complex geometries and multi-sided precision milling.

  • CNC Control: Siemens 828D with 15.6″ High-Resolution Color Screen
  • Spindle System: CAT40 Taper configured for Through-Spindle Coolant
  • Chip Management: Longitudinal Drag-Belt Chip Conveyor & High-Pressure Coolant Pump
  • Inspection Setup: Renishaw RMP60 Part Inspection System with Radio Interface & Calibration Sphere
  • Environmental Control: Top Cover Enclosure & Integrated Oil Mist Exhaust System
ROMI DCM 620-5F 5-Axis Machining Center
Heavy Duty Turning Center

ROMI GL 400M CNC Turning Center with Live Tooling

$136,829 USD

High-rigidity CNC lathe equipped with driven tools and programmable tailstock for complete turning and milling operations.

  • CNC Control: Fanuc 0i-TD Precision Control
  • Chucking & Bar Capacity: 10″ Hydraulic Chuck (254mm), 2.52″ Bar Capacity (64mm)
  • Turret & Tooling: Driven Tool Turret with Automatic Tool Setter
  • Tailstock & Coolant: Programmable Tailstock with Built-In MT-4, 15 Bar Coolant Pump
  • Conveyor System: Longitudinal Hinged-Belt Chip Conveyor with Oil Skimmer
ROMI GL 400M CNC Turning Center

Certified Pre-Owned EDM Machines

Certified Pre-Owned

Mitsubishi FX10 Submerged Wire EDM Machine

$14,500 USD

Reliable submerged wire EDM machine thoroughly inspected, fitted with new seal plates and power cables.

  • Travel Capacity: X 13.7” x Y 9.8” x Z 8.7″
  • Work Table Size: 24.8″ x 20.8″ (Max Workpiece: 31.5″ x 22.65″ x 8.5″)
  • Taper Capacity: +/- 15 Degrees at 4″ Thickness
  • Automation: Automatic Wire Threader & Integrated Wire Chopper
  • CNC Control: Mitsubishi 32-Bit CNC with Advanced Remote Pendant and LCD Screen
  • Condition: Fully Tested, Reconditioned Seal Plates & Updated Power Cables
Mitsubishi FX10 Submerged Wire EDM

Request Detailed Machine Specifications & Delivery Quotations

Looking for a specific model, application test-cut, or custom shipping solution? Connect directly with our machine tool engineering team for immediate technical documentation and certified inspection records.

Contact Us